Scalping Cutters

Product Code : MXSCA 18


Maxwell can proudly say that they hold a monopoly on Scalping cutter. Maxwell tools is the only supplier in the industry capable of manufacturing clear up to 1600mm OAL milling cutters. That level of expertise shows through in the quality of the scalping cutters themselves. These scalping cutters are only supplied to the top manufacturers of copper, brass, ferrous and non-ferrous metal sheets and strips. Maxwell manufactures all of their scalping cutters based on a customer exact requirements. Customer should have no problem finding what their looking for in the wide range of diameters, lengths, and bores that are on offer.

Selection Of Cutters:

Maxwell offers this huge range of scalping cutters to ensure that customers can always find what they need. That can be difficult because the type of milling cutter will change depending on the customers' needs. Different projects call for different cuts, materials needing to be cut, number of parts needing to be achined, and the milling machine available.

No other company in the market will be able to offer such a wide range of selection, enough to Customers will have to figure it all of this information before they order to make sure they are getting the style of scalping cutter that they need.

Ordering Instruction

When filling out an order form for scalping cutters you will need to include: OD, length (OAL), bore, and helix angle.

Note : Coatings available on every Tool

Number Of Teeth In Milling Cutters

There is a wide range of milling cutters all designed for different projects; which means they all have a different number of teeth. When it comes to the optimum level of performance unfortunately there is no universal rule to explain the cutters for every project. There are two factors that can be used as a guideline when deciding on the correct milling cutter for a project.

The first factor to take into account is the number of teeth on the cutter. There needs to be enough space between the teeth so that it doesn't reduce the chip space between them. If your milling cutter doesn't have enough the cutter will jam and breakdown.

The second factor to keep in mind is that the chip space of your scalping or milling cutters are always smooth without any sharp corners. Otherwise the cutters could become clogged in the chip space. It's important to buy high quality cutters, like those that Maxwell sells, to reduce the risk that they will have sharp corners. The cutters should also be checked before and after each use to be sure they haven't become sharp over time.

Explanation of the “hand” of milling cutters:

The second factor to keep in mind is that the chip space of your scalping or milling cutters are always smooth without any sharp corners. Otherwise the cutters could become clogged in the chip space. It's important to buy high quality cutters, like those that Maxwell sells, to reduce the risk that they will have sharp corners. The cutters should also be checked before and after each use to be sure they haven't become sharp over time.