After hob or shaper cutter processing, shaving cutters are used to remove very small portions of the gear tooth surface.
After hob or shaper cutter processingGear Shaving operation fixes errors in the index, helical angle, tooth shape, and eccentricity. Additionally, the procedure can enhance tooth surface polish and, by using crowned tooth forms, remove the risk of tooth end load concentrations in service. Shaving enables shape adjustments that lower gear noise. The load-bearing capacity, safety factor, and service life of the gear can all be increased by making these improvements., shaving cutters are used to remove very small portions of the gear tooth surface.
A high output rate can be achieved during the gear-shaving procedure. External spur or helical gears up to 180″ in diameter can be shaved using machines. There are more machines for internal spur or helical gears.
Looking for Gear Shaving Cutters?
Connect with us at
https://www.maxwelltools.com/gear-shaving-cutters/
